Cambridge Topaz SR10


The SR10 boasts 85 watts of power, a built-in phono stage for connecting record players with Moving Magnet cartridges, a front panel 3.5mm input for iPod/MP3 players, built-in FM/AM radio with RDS and 30 presets and four analogue inputs for connecting all your music, AV and audio sources.
85 watts x 2 into 8 ohms (20-20,000 Hz) at 0.15% THD
Toroidal transformer ensures clean, dynamic sound
5 Audio inputs (including MM/MC phono input for a turntable, and a front mini jack)
30 AM/FM station presets
Radio Data System (RDS) displays broadcast text from stations (where available)
Brushed aluminum front panel with wrap-over lid assembly controls resonance
Quiet speed controlled cooling fan for higher efficiency and cleaner sound

Prices are applicable to stock on hand only. Please confirm stock availability and prices before ordering.

SKU 91 Categories ,


Stereo Amplifier: The Cambridge Audio SR10 stereo receiver employs a fully-discrete, high-power, bipolar-transistor based, power amplifier rated at 85 watts RMS x 2-channels. The amplifier can handle impedances between 4 and 8 ohms.

A/B Speakers: The Cambridge Audio SR10 is equipped with A & B speaker terminals to connect two pair of loudspeakers or bi-wire a single pair of loudspeakers. You can select which speaker outputs are heard – A speaker only, B speaker only, A+B speaker, or Off. The amplifier can support a 4-ohm load when driving only one pair of speakers. The amplifier can support an 8-ohm load when driving two pair of speakers.

Rugged Chassis Design: The Cambridge Audio SR10 stereo receiver has been carefully designed with a brushed aluminum front-panel, rigid metal chassis, and internal bracing to prevent resonance and improve sound quality.

Toroidal Transformer: The Cambridge Audio SR10 stereo receiver utilizes a custom low-flux toroidal transformer for audiophile performance.

Cooling Fan: The Cambridge Audio SR10 features a very quiet speed-controlled cooling fan to keep the receiver operating at a normal temperature for consistent performance and outstanding reliability.

Tuner Functions
AM/FM Tuner: The Cambridge Audio SR10 stereo receiver features a built-in AM/FM with manual, seek, and preset tuning.
RDS: The built-in AM/FM tuner features RDS for station name display on FM stations that support this function.
Preset Tuning: You can store up to 30 AM/FM station presets (15 each).
Mono Mode: For low quality stereo FM signals, selecting the Mono mode can reduce the noise and improve reception.

LCD: The Cambridge Audio SR10 stereo receiver features a front-panel LCD for the display of information, such as the selected input source, station identification, volume, and tone/balance level.
Volume Control: The Cambridge Audio SR10 features a front-panel rotary dial to increase or decrease the level (-80 to 0) of the sound from the speaker outputs and headphone output of the unit. You can also use the included remote control to adjust the volume level.
Tone Control: The Cambridge Audio SR10 offers Bass (100Hz) and Treble (20kHz) controls which are adjustable from -10 to +10dB. The unit also allows you to balance the unit’s speaker outputs left-to-right (+/-10).
Remote Control: The Cambridge Audio SR10 comes supplied with an IR remote control for wireless operation (Menu/Source/Volume) of the stereo receiver. The included remote control will also operate playback function of the Cambridge Audio CD10 CD player (779CD10, sold separately).

4 Rear-Panel Inputs: The Cambridge Audio SR10 stereo receiver is equipped with 5 rear-panel analog stereo RCA inputs (MP3/Aux, CD, Phono, BD/DVD). These analog stereo RCA terminals are suited for any line-level source.
Phono Input: This input has a built-in phono stage. Turntables fitted with a moving magnet (MM) or high-output moving coil (MC) cartridge can be used.
Note: Low output moving coil types (<1mV and normally 10-1,000 ohm load impedance) cannot be directly connected.
Front-Panel Input: The Cambridge Audio SR10 stereo receiver features a front-panel 3.5mm auxiliary input for temporary connection of a portable digital audio player.
Note: Connecting an audio device to the front-panel 3.5mm auxiliary input will override the unit’s rear-panel RCA auxiliary input.
Record Output: The stereo receiver’s analog stereo RCA record output lets you connect a tape recorder or CD-burner. The unit’s record output is not affected by the volume control or tone adjustments.
Subwoofer Output: A single rear-panel RCA subwoofer output is used to connect a powered subwoofer.
Binding Posts: The Cambridge Audio stereo receiver is equipped with 8 binding-post speaker terminals to connect two pair of bookshelf or floor-standing loudspeakers. The binding-post terminals will accept bare wire, pin-connectors, and banana plugs (single/dual). The binding post terminals are color-coded (red/black) to distinguish positive and negative.
Headphone Output: The Cambridge Audio SR10 stereo receiver is equipped with a front-panel 1/4″ headphone socket for connection of a set of headphones. The amplifier’s speaker outputs are muted when headphones are connected.
Note: Headphones with an impedance of between 32 and 600 ohms are recommended.
Detachable IEC Power Cord: The Cambridge Audio SR10 stereo receiver includes a detachable 5′ IEC power cord.

Power Output
85W RMS into 8 Ohms (2-channels driven)

1x CD RCA input
1x Tuner/DAB RCA input
1x MP3/AUX RCA input
1x MP3/AUX 3.5mm input (front panel)
1x BD/DVD RCA input
1x Phono RCA input for Moving Magnet cartridges

1x Rec Out RCA output
1x Subwoofer output
1x Headphone output

Max Power Consumption
500 Watts

Radio Function
FM/AM, 30 presets Radio Data System (RDS) for FM Stations

Dimensions (WXHXD)
430 x 110 x 340mm

8.1Kg (17.8lbs)


There are no reviews yet.

Be the first to review “Cambridge Topaz SR10”

Privacy Preference Center